Back to Blogs
Door Hardware & Security
November 4, 2026

Buying a Padlock? Measure the Shackle, Not Just the Body

By Jinnah Hardware
Buying a Padlock? Measure the Shackle, Not Just the Body

Buying a padlock for a gate, cupboard or store-room hasp? Body width is only one measurement. A lock can look the right size yet have a shackle that will not pass through the fitting or reach around it.

Check three shackle dimensions

  • Diameter: the thickness of the curved bar. Compare it with the usable opening in the hasp or staple, not the fitting's outside width.
  • Internal height: the clear space above the lock body, inside the shackle's arch. It must accommodate the fitting.
  • Internal width: the clear space between the shackle legs. Compare it with what the bar must pass around.

One model's numbers are not a universal size

The ABUS 65/40 sheet lists a 40 mm body width, 6.5 mm shackle diameter, and 22 mm horizontal and vertical clearances. Those figures describe that standard model; do not transfer them to a long-shackle variant.

Master Lock's selection guide measures shackle length from the top of the body to the inside of the shackle and asks buyers to consider space and environment.

Confirm the complete fit

Check room to insert and remove the lock and operate its key or dial with the hasp shut. Do not force a mismatch or grind parts to make them fit. Fit alone is not a security rating or proof of outdoor suitability; confirm both separately.

For a new wall-mounted fitting, read our pre-drilling safety guide. Bring photos and measurements to Jinnah's team for selection help.

Looking for matching hardware?

Explore our curated selection of door fittings, locks, and architectural hardware.

Share this article:
More Articles