Cabinet-Pull Screws: Match the Thread and Front Thickness

A cabinet pull can match the existing holes yet still have the wrong fixing screws. When changing kitchen handles, check the thread and the material the screw must pass through, not just hole spacing.

Match the exact thread

Do not assume every pull uses M4. Hafele's Cosmopolitan bar-pull page lists variants with M4 or 8-32 threads. Confirm the selected handle's specification, including pitch where stated. Do not force a screw that resists turning.

Measure the fixing path

Measure the total thickness the screw passes through at the fixing hole. A drawer with an added decorative front may need a different screw length from a cupboard door. Follow the handle maker's requirements for thread engagement; do not choose length by appearance alone.

Test one handle first

• Keep thread size and screw length as separate checks. Hettich's 2024 handle catalogue lists multiple M4 fixing-screw lengths, not one universal length.
• If the fixing will not clamp the pull firmly, stop and recheck the screw and fitting instructions rather than tightening harder.
• Use a cut-to-length screw only as its manufacturer directs; do not assume any screw is designed to be shortened.

Check our pull-spacing guide too. Bring the handle, old screw and thickness measurement to Jinnah's team; confirm the exact replacement and availability before ordering.