Back to Blogs
Door Hardware & Security
November 3, 2026

304 or 316 for Coastal Door Hardware? Check the Exposure Too

By Jinnah Hardware
304 or 316 for Coastal Door Hardware? Check the Exposure Too

For a salt-exposed entrance, do not choose hardware by a shiny silver appearance or a “stainless” label alone. Ask for the exact model's documented material and intended environment.

316 is a step up, not immunity

ASSDA's grade guide says 316 offers greater resistance than 304 to pitting and crevice corrosion in warm chloride environments. It also warns that 316 can still pit or suffer crevice corrosion. A grade number is not a promise that a fitting will never stain or corrode.

Check the location and the whole fitting

  • Describe the actual exposure: salt spray, shelter from rain and access for cleaning. A sheltered fitting can retain deposits instead of being washed by rain.
  • Confirm the grade and surface finish for the exact model, and ask about the supplied fixings too. Do not assume a brushed or polished look identifies the alloy.
  • Ask whether the detail drains and can be cleaned, rather than trapping salty moisture in tight gaps. Agree a maintenance plan suitable for the location.

ASSDA's coastal-corrosion FAQ treats grade, surface condition, deposits, exposure and maintenance as interacting factors—not a single-label solution.

Follow the hardware maker's exact care guide, especially for coated or decorative finishes; see our finish-care article. For selection help, contact Jinnah with the site conditions and model details.

Looking for matching hardware?

Explore our curated selection of door fittings, locks, and architectural hardware.

Share this article:
More Articles